A6 4F Manual Gearshift Knob Replacement with S-line Knob

To be honest, the S-line gearshift knob looks much, much better than the regular one both on the manual and automatic gearshift levers. In addition, especially if you're driving a car with manual gearshift you will be constantly in contact with that lever. This is why it's totally worth it to replace it with the S-line version. It's easy and not very expensive retrofit. First, put your fingers under the edge of the leather base of the knob and carefully pull it out. Once you do that, lift the leather up to reveal the bracket that holds the knob. Use a screwdriver to remove it and pull out the knob from the axel. Once the knob is free, you need…

Continue Reading

A6 4F OEM Parktronic (Audi Parking System – APS) Retrofit Manual

In this post we will show you how to retrofit an original Audi A6 4F parktronic system to your car only on the rear bumper with or without visualisation. Table of contents: Parktronic Module Parktronic sensors Sensor holders/new bumper Sensor Cable CAN and Buzzer cable Buzzer Installation Parktronic Module It is important to get the correct module for your needs. We'd recommend to get a module for 4 sensors and graphics support. The camera retrofit is not an easy task and adding sensors to the front bumper is not part of this manual. 4F0 910 283 - 4 sensors, no graphics support 4F0 910 283 A - 8 sensors, no graphics support 4F0 910 283 B, D - 4 sensors, with graphics…

Continue Reading

A6 4F OEM Bluetooth Retrofit Manual

In this post I've described in as much details as possible the steps you need to follow to retrofit an original Audi Bluetooth module into your Audi A6 4F. You will need the following parts for the retrofit Bluetooth module Optical cable Communication cable Microphone cable & Microphone Installation Coding Bluetooth Module The bluetooth module that you should look for is with part number 4E0 910 336 MX. Don't buy old modules since they're known to be often faulty and are replaced by Audi. Optical cable The optical cable that you need looks like the one on the photo below. You can purchase any optical cable splitter (for AMI for example) or if you have access to a second-hand car dealership…

Continue Reading

A6 4F OEM Xenon Retrofit Manual

In this post we will show you how to retrofit the original Audi A6 4F xenon headlights on a car with the regular halogen headlights. We will add the regular bi-xenon headlights without automatic leveling or corner turning. This is the easiest way to get xenon headlights on your Audi A6 4F car. Table of contents: Headlights Xenon Bulbs Igniters Ballasts Adapters Central Electrics Module Installation Coding Gallery Most of you will probably get your headlights from eBay. If you do this, there are two general types of headlights that are for sale - bare headlights that don't have ballasts, bulbs or igniters, and full kits. It's up to you to decide which will best fit your needs. Headlights When…

Continue Reading
Close Menu