Audi A6 4G C7 – Motion Sensor Trunk Release (Kick Open the Trunk)

Opening the trunk with a kick under the trunk can be very handy especially when your hands are full. Originally, Audi released this for the USA marketet mostly but the sensors on 2012 models weren't working properly or at all as a matter of fact. They've stopped offering them in 2013 and then in 2014 started offering the feature again with better, improved module. Make sure, when retrofitting this to get your parts from a 2014 cars or you will fit a ridiculously bad working motion sensor. Note, that this will work only if you already have power-opening of your trunk working. Parts Required Here are the parts you need plus a cable from your motion sensor module to the…

Continue Reading

Audi A6 4F Heated Washer Jets with 3 Beams Retrofit

There is a great retrofit from Audi that you can easily add to your car - the tripple windshield jets. Part number: 4F0 098 101 It comes with a CD with full instructions on how to install and adjust your new jets. Here's the original Audi Manual. Detailed Instructions Manual First, you need to open your trunk and remove the old washer jet pulling from the side of the window: Then, place the two strips you receive with the jets the way shown: Finally, plugin the new washer jet and fit it the same way, you've removed the old one. Congrats, all done!

Continue Reading

A6 4F OEM Parktronic (Audi Parking System – APS) Retrofit Manual

In this post we will show you how to retrofit an original Audi A6 4F parktronic system to your car only on the rear bumper with or without visualisation. Table of contents: Parktronic Module Parktronic sensors Sensor holders/new bumper Sensor Cable CAN and Buzzer cable Buzzer Installation Parktronic Module It is important to get the correct module for your needs. We'd recommend to get a module for 4 sensors and graphics support. The camera retrofit is not an easy task and adding sensors to the front bumper is not part of this manual. 4F0 910 283 - 4 sensors, no graphics support 4F0 910 283 A - 8┬ásensors, no graphics support 4F0 910 283 B, D - 4┬ásensors, with graphics…

Continue Reading

A6 4F OEM Xenon Retrofit Manual

In this post we will show you how to retrofit the original Audi A6 4F xenon headlights on a car with the regular halogen headlights. We will add the regular bi-xenon headlights without automatic leveling or corner turning. This is the easiest way to get xenon headlights on your Audi A6 4F car. Table of contents: Headlights Xenon Bulbs Igniters Ballasts Adapters Central Electrics Module Installation Coding Gallery Most of you will probably get your headlights from eBay. If you do this, there are two general types of headlights that are for sale - bare headlights that don't have ballasts, bulbs or igniters, and full kits. It's up to you to decide which will best fit your needs. Headlights When…

Continue Reading
Close Menu